 | Avenir Slider Alloy Water Bottle Cage
Avenir Alloy Extra Srong oversized 6mm tubes. Designed with non-slip rubber inserts to maintain a tight hold of the bottle under all condtions. Same design as the Italian models for a fraction of the cost.
| $4.99
MSRP $10
Avenir MORE INFO |
 | Eleven81 Side Slide Bottle Cage Black
Alloy construction. Small frame compatible. For the small frames that do not have much room for the water bottle. Side entry and exit.
| $7.99
MSRP $12
Avenir |
| Eleven81 Side Slide Bottle Cage Silver
Alloy construction. Small frame compatible. For the small frames that do not have much room for the water bottle. Side entry and exit.
| $7.99
MSRP $12
Avenir |
 | BikeHard Alloy Water Bottle Cage
BikeHard Alloy Water Bottle Cage made with 6 mm 6061 Aluminum tubing. Universal fit for all bikes. Can hold most water bottles from 20 to 30 ounces. Black or Silver.
| $3.99
MSRP $10
BikeHard MORE INFO |
 | BikeHard Carbolite D1 Carbon Waterbottle Cage
The BikeHard Carbolite Carbon Water bottle Cage is constructed entirely of high modulus carbon fiber. Its 3K weave exterior provides the tightest, most dense composite structure available from carbon. Reinforced bottom stopper and top flange hold the bottle firm and secure. Weighing in at 27 grams, it is one of the lightest strongest designs on the market.
Features:
High Gloss Finish.
Extreme Durability.
Elastic enough to fit most bottles.
Natural flowing curves.
Colors: Naked Black, Red, Yellow, Blue | $29.99
MSRP $45
BikeHard MORE INFO |
 | BikeHard Carbolite D2 Carbon Waterbottle Cage
The BikeHard Carbolite D2 Carbon Water bottle Cage is constructed entirely of high modulus carbon fiber. Its 3K weave exterior provides the tightest, most dense composite structure available from carbon. Reinforced bottom stopper and top flange hold the bottle firm and secure. Weighing in at 22 grams, it is one of the lightest strongest designs on the market.
Features:
High Gloss Finish.
Extreme Durability.
Elastic enough to fit most bottles.
Natural flowing curves. | $29.99
MSRP $45
BikeHard |
 | BikeHard Carbolite D3 Carbon Waterbottle Cage
The BikeHard Carbolite D3 Carbon Water bottle Cage is constructed entirely of high modulus carbon fiber. Its 3K weave exterior provides the tightest, most dense composite structure available from carbon. Reinforced bottom stopper and top flange hold the bottle firm and secure. Weighing in at 19 grams, it is one of the lightest strongest designs on the market.
Features:
High Gloss Finish.
Extreme Durability.
Elastic enough to fit most bottles.
Natural flowing curves. | $39.99
MSRP $60
BikeHard |
 | BikeHard Water Bottle Cage Bolts
High quality stainless steel water bottle cage bolts for mounting your water bottle cage to the braze on holes in your frame. Comes as a set of 2 identical bolts, enough to mount 1 water bottle cage.
16mm stainless buttonhead (rounded head) bolt.
Stainless steel
7 grams. | $0.99
MSRP $2
BikeHard |
 | Blackburn Camber CF (Gloss) Carbon Water Bottle Cage
Blackburn Camber CF Carbon Water Bottle Cage has a flared mouth to improve ease of bottle insertion. Reinforcing side ribs increase stiffness to boost strength and bottle grip. The lower cradle/bottle stop area is designed to provide more support for critical strength in an area where other carbon cages fail. And the whole thing is optimized for an ideal balance between quick bottle access and optimal bottle grip.
It’s lightweight—a mere 32 grams to be exact—but more importantly, it’s strong. Strong enough that it’s backed by Blackburn’s Lifetime Warranty.
Specifications:
Material: Carbon Fiber
Weight: 32 g
Color: gloss or matte carbon | $44.99
MSRP $45
Blackburn |
| Blackburn Camber CF (Matte Black) Carbon Water Bottle Cage
Blackburn Camber CF Carbon Water Bottle Cage has a flared mouth to improve ease of bottle insertion. Reinforcing side ribs increase stiffness to boost strength and bottle grip. The lower cradle/bottle stop area is designed to provide more support for critical strength in an area where other carbon cages fail. And the whole thing is optimized for an ideal balance between quick bottle access and optimal bottle grip.
It’s lightweight—a mere 32 grams to be exact—but more importantly, it’s strong. Strong enough that it’s backed by Blackburn’s Lifetime Warranty.
Specifications:
Material: Carbon Fiber
Weight: 32 g
Color: gloss or matte carbon | $44.99
MSRP $45
Blackburn |
 | BlackBurn Chicane Cage Metal Matrix Titanium Color
BlackBurn Chicane Cage Lightweigh Metal Matrix cage for road bikes. Titanium finish. Weight 41gms
| $11.99
MSRP $15
Blackburn |
 | Blackburn Comp (BC-1) Alloy Black Water Bottle Cage
Blackburn BC-1 Alloy Water Bottle Cage is a strong yet light cage. Will hold 20 to 32 oz bottles. Weight 55 gms.
| $4.99
MSRP $5
Blackburn |
| Blackburn Comp Alloy Silver Water Bottle Cage
Blackburn BC-1 Alloy Water Bottle Cage is a strong yet light cage. Will hold 20 to 32 oz bottles. Weight 55 gms.
| $4.99
MSRP $5
Blackburn |
 | Blackburn Mountain Alloy Water Bottle Cage
Blackburn MC-1 Mountain Water Bottle Alloy Cage has a Knurled top and wide design to lock in the bottle, weighs in at 79 grams, and is backed by Blackburns lifetime warranty.
| $5.99
MSRP $6
Blackburn MORE INFO |
 | BlackBurn SwitchBack MTN Cage Metal Matrix Silver
BlackBurn's lightest mountain bike cage ever built. The distinctive "Whiplash Curve" design grips bottle securely without adding extra weight. Advanced composite metal matrix material. Weight: 55 grams
| $10.99
MSRP $16
Blackburn |
 | Blackburn Switchback Stainless Steel Cage
Blackburn Switchback Stainlees Steel Cage. Rust free for many years of maintenance free use. Thicker 5mm stainless steel construction for an even tighter grip on large bottles. 56 grams.
Material: 5mm Stainless Steel
Weight: 53 g / 2 oz
Color: Satin | $14.99
MSRP $15
Blackburn |
 | Cannondale Alloy 6.2mm Alloy Cage Pewter
High Quality Alloy cage 6.2 mm thick. Cannondale quality behind this extra strong and light water bottle cage.
| $3.99
MSRP $10
Cannondale |
 | Cannondale C Logo Water Bottle Cage
Cannondale C Logo Water Bottle Cage gives you easy bottle access with more wrap around coverage than a standard cage.
Features & Specs:
Durable, lightweight nylon composite construction
Lifetime Warranty
39 grams | $14.99
MSRP $15
Cannondale |
 | Cannondale Lite Weight Water Bottle Cage
Cannondale Lite Weight Water Bottle Cage 42g.
Sexy titanium color | $6.99
MSRP $12
Cannondale |
 | Elite Ciussi Gel Cage
Elite Ciussi Gel Cage. High resistant silicon alloy is used to make the Ciussi Gel water bottle cage. Two lateral buttons provide a solid hold on the bottle.
Specification:
High resistant silicon alloy bottle cage.
Lateral Gel anti-slip buttons.
Diameter 74 mm.
Rear aluminium plate TIG welded.
| $19.99
MSRP $30
Elite Ciussi MORE INFO |
 | Elite Ciussi Tour de France Team Water Bottle
Elite Ciussi Tour de France Team Water Bottles. Look like a professional athelete, choose from an assortment of sponsored water bottles from the Tour de France.
Teams:
Bouygues Telecom
Euskaltel
Footon-Servetto Fuji
FRANCAISE DES JEUX (FDJ - French National Lottery)
Liquigas
Katusha (Katiowa/Itera) | $9.99
MSRP $15
Elite Ciussi MORE INFO |
 | Look HR Carbon Bottle Cage
Look HR Carbon Bottle Cage. At only 24 grams, The use of HR (High Resistence) Carbon, A superb design, and gloss carbon finish, allows it for 100% Look bike finish. Made of natural carbone for Elasticity.
Features:
Weight: 24 grams
Rubber gripper and textured inner walls for better grip
Comes with hardware | $49.99
MSRP $60
Look MORE INFO |
 | Origin8 Joe-2-Go Handlebar Mounted Cup Holder
Coffee drinkers rejoice! You can no go riding with a cup of coffee! The Origin8 Joe-2-Go Handlebar Mounted Cup Holder is designed to hold those tapered cups from your favorite coffee shop. All-aluminum construction and a rubber inner liner make sure your morning wake-up juice stays put.
Features:
Tapered (angled) ring for easy access
6061 aluminum construction
Non-slip inner liner
Available in standard and oversized clamps
2 sizes for different sized cups. | $14.99
MSRP $20
Origin8 MORE INFO |
 | Profile Design Fuse Kage Black
Profile Design Fuse Kage Black. Constructed from injected nylon/glass ber composite, the Fuse Cage provides excellent support for water bottle in almost all riding conditions. The unique contoured shape facilitates bottle insertion with minimal e ffort and the multiple bottle/cage contact points ensure secure holding strength.
Specifications: Colors: Black
Material: Nylon GF
Weight: 37 grams | $8.99
MSRP $12
Profile Designs |
 | Profile Design HC Mount
The Profile Design HC Mount is an ingenius way to fit your favorite standard waterbottle and cage in a spot that's asy to access and maintains aerodynamics. For extra aero dynamics, pair it up with Profile Design's Razor water bottle system.
Features:
Lightweight 6061 Aluminium crossbars mounts to Aerobar extensions
Positions bottle cage in the most aerodynamic position possible
Easily and securely attaches to extensions up to 130mm in width
Can be mounted above or below the extensions for optimal bottle position
Available with or without Profile Design Kage, bottle not included | $10.99
MSRP $15
Profile Designs MORE INFO |
 | Profile Design Karbon Kage KK1
Profile Design Karbon Kage KK1. Weighing in at a mere 33 grams makes this one of the lightest items available. The unique bottle grip ensures against "bottle launch" no matter where it is mounted.
Matte Carbon Finish
Weight: 33g
| $39.99
MSRP $50
Profile Designs MORE INFO |
 | Profile Design Karbonlite Kage (Elite) KK3
Weighing in at a mere 18 grams makes this one of the lightest items available. The unique bottle grip ensures against "bottle launch" no matter where it is mounted.
Matte Carbon Finish
Weight: 33g
Features:
Sculpted design
Carbon black w/silver logo
18 grams | $44.99
MSRP $60
Profile Designs |
 | Profile Design Karbonlite Kage KK2
Weighing in at a mere 21 grams makes this one of the lightest items available. The unique bottle grip ensures against "bottle launch" no matter where it is mounted.
Matte Carbon Finish
Weight: 33g
| $54.99
MSRP $65
Profile Designs |
 | Profile Design RM System 1 Waterbottle Rack
The Profile Design RM System 1 Waterbottle Rack is an updated version of their popular Aquarack design, a convenient and simple way to place two water bottles behind your seat. It's also an excellent way to improve your aerodynamics by removing your cages and bottles from the frame and placing them behind the rider. This in fact, fills in the turbulence ‘hole’ behind the riders posterior, thereby reducing drag.
Features/Specifications:
Full angular adjustment allows bottles to be rotated
CNC 6061 Aluminum bracket mounts to your saddle's rails and is shielded by the rider for improved aerodynamics.
Mounts to standard size saddle rails.
Comes with 2 Profile Design Kages.
Weight: 190g | $39.99
MSRP $50
Profile Designs MORE INFO |
 | Profile Design RMC Carbon Water Bottle Cage Rack
Profile Design RMC Carbon Water Bottle Cage Rack is designed with the triathelete in mind. This carbon fiber rear drink system mounts behind the rider and has accessory mounting straps. An extra storage area is built under the saddle for various accessories. The rail mount is compatible with standard 7mm saddle rails which means it will mount to most of the saddles out there. Available with cages as pictured. Colors: Gloss carbon or White. Weight: 120 grams (w/o cages)
| $149.99
Profile Designs MORE INFO |
 | Profile Design Stryke Water Bottle Kage
Profile Design Stryke Water Bottle Kage is made of a Injected molded Nylon/Fiberglass
Red, Blue, Yellow, Black
40g
| $4.99
MSRP $9
Profile Designs MORE INFO |
 | Profile Designs Aqua Rack Water Bottle Holder
Profile Designs Aqua Rack Water Bottle Holder let's you put 2 water bottles right behind the saddle.
Features: 6061-T6 aluminum clampand extension
Includes 2 lightweight Profile Design Kages
Fits 27.2mm-31.8mm seatposts
Matte black | $35.99
Profile Designs |
 | Sunlite Handlebar Mount Water Bottle Cage
Sunlite Handlebar Mount Water Bottle Cage will mount on to just about any handlebar. 2 bolt clamp with foam shim liner ensures secure and firm fit.
Black or Silver | $4.99
MSRP $14
Sunlite MORE INFO |
 | Topeak Modula Bottle Cage
The Modula Water Bottle cage is designed to handle all size bottles and weights. Topeak’s diameter adjustable bottle cage. Fits normal water bottles and small mineral water bottles.
Adjustable range: O/D 63-74mm
Size (LxWxH): 3.4" x 3" x 6.2"
Weight: 75 grams
| $9.99
MSRP $15
Topeak |
 | Topeak Modula EX Bottle Cage
The Modula Water Bottle cage is designed to handle all size bottles and weights. Topeak’s diameter adjustable bottle cage. Fits normal water bottles and small mineral water bottles.
Features: Material: Engineering grade plastic. Weight: 64 grams. Adjustable range: O/D 63-74mm. Size (LxWxH): 3.4" x 3" x 6.2" | $9.99
MSRP $15
Topeak |
 | Topeak Modula XL Water Bottle Cage
Topeak Modula XL handles large bottles. Fits 1-1.5 liter bottles.
Specifications:
Material: Aluminum/Engineering Grade Plastic. Size (L x W x H): 4.2" x 3.6" x 14.9". Weight: 125 gs. Art no.: TMD02B | $11.99
MSRP $13
Topeak |
 | Topeak Mono Bottle Cage (TMN02)
Topeak Mono Bottle Cage. Lightweight engineered plastic one-piece cage.
Specifications:
Material: Engineering Grade Plastic. Weight: 45 gs. Art no.: TMN02 | $5.99
MSRP $7
Topeak |
 | Topeak Mono Cage CX
Lightweight and durable, a new shape
holds water bottles securely. No need to worry about rusting and staining your bike or bottle.
Features:
Material: Engineering Grade Plastic
Size: (L x W x H) 7.3 x 8.5 x 15.2 cm
2.9” x 3.3” x 6”
Weight: 48 g / 0.11 lb | $5.49
MSRP $7
Topeak MORE INFO |
 | Topeak X-15 Adapter
Topeak X-15 Adapter holds your bottle cage securely and with a twist, gives you access to your bottle.
Features: Material: Engineering grade plastic. Size: 1.0" x 0.6" x 3.1" Weight: 25 gs Art no. TX15 | $3.99
MSRP $5
Topeak |
 | TwoFish Stainless Steel Bottle/Cage
TwoFish Stainless Steel cage with a cinch velcro mounting system. For bicycles that do not have water bottle screws. Water bottle (24 oz) included.
Note: Bottle is blue: | $18.99
MSRP $23
Twofish |
 | Zipp Carbon Water Bottle Cage
The Zipp Carbon cage is beautifully sculpted of carbon fiber material. Use it with either road or tri bikes. Aluminum mounting plates included. Weight 33 grams.
| $49.99
MSRP $70
Zipp Wheels |
